1
Fair Work Act 2009
s.156 - 4 yearly review of modern awards
4 yearly review of modern awards – Award stage – Group 1
(AM2014/64 and others)
JUSTICE ROSS, PRESIDENT
VICE PRESIDENT HATCHER
SENIOR DEPUTY PRESIDENT HAMBERGER
DEPUTY PRESIDENT BULL
COMMISSIONER BISSETT MELBOURNE, 9 JUNE 2017
4 yearly review of modern awards – award stage – Group 1 technical and drafting issues –
Manufacturing and Associated Industries and Occupations Award 2010 – Professional
Diving Industry (Industrial) Award 2010.
1. Introduction
[1] The Fair Work Commission (the Commission) is currently reviewing all modern
awards as required under s.156 of the Fair Work Act 2009 (the Act). On 23 October 2015 the
Full Bench issued a decision with respect to Group 1C, 1D and 1E awards (the October 2015
decision).1 This decision deals with a number of technical and drafting issues arising from the
exposure draft based on the Manufacturing and Associated Industries and Occupations
Award 2010 (the Manufacturing Award) and the Professional Diving Industry (Industrial)
Award 2010 (the Industrial Diving Award). The decision also provides an update on the status
of the technical and drafting issues in the other awards allocated to Group 1 as listed in
Attachment A.
2. The Manufacturing Award
[2] In the October 2015 decision, with respect to the Manufacturing Award, the Full
Bench said:
‘[109] There are a number of other outstanding substantive amendments proposed to this
award. These relate to the timing of payment on termination and the payment of training costs
when training is undertaken in connection with a training contract. The parties are asked to
confirm the outstanding issues within 21 days of the date of this decision. These matters will
be referred to Commissioner Bissett for further conference and hearing, if necessary, and
report to the Full Bench.’
[3] A conference of the parties in relation to their feedback on the Manufacturing Award
exposure draft (Exposure Draft), as invited in the October 2015 decision, was conducted on
1 February 2016. A statement was issued on 25 February 2016 (the February 2016 statement)
by Commissioner Bissett to the parties indicating how various matters arising from that
[2017] FWCFB 3177
DECISION
AUSTRALIA FairWork Commission
[2017] FWCFB 3177
2
decision would be progressed. Subsequent to that statement further conferences on specific
maters have occurred and written submissions received from interested parties.
[4] This decision deals with feedback provided on the Exposure Draft of the
Manufacturing Award released in conjunction with the October 2015 decision except for
those matters being dealt with separately as indicated in the February 2016 statement.
Note: the exposure draft that will be published as a result of this decision will include vehicle
manufacturing provisions from the Vehicle Manufacturing, Repair, Services and Retail Award
2010. This has resulted in some renumbering of clauses. Where clause references have been
renumbered in the revised exposure draft the new reference will be included in the decision
below in brackets.
Time and wages record
[5] The AMWU propose that references to ‘time and wages record’ be replaced with ‘pay
record’ to better reflect the wording in the Fair Work Regulations 2009 (which uses the term
“Records – Pay”). This, it says, would also better reflect the note at clause 24 of the Exposure
Draft.
[6] We see no reason to make the change as proposed. The term ‘time and wages record’
is used across all awards. Its meaning is understood and no confusion arises from its
continued use.
Clauses 13.2(d) Ordinary hours of work – day workers
[7] The AMWU has proposed that clause 13.2(d) be amended to refer to the consultation
provisions in relation to changes to rosters or hours of work contained in clause 40.2 of the
Exposure Draft such that the clause would read:
13.2(d) The ordinary hours of work are to be worked continuously, except for meal breaks, at
the discretion of the employer, in accordance with clause 40.2, between 6.00 am and 6.00
pm…
[8] The AMWU says that the insertion of the underlined words would make the award
clear to read and easier to understand. It submits that this would make the award consistent
with the October 2015 decision and confirm that the employer’s right to change an
employee’s regular rostered hours is subject to the consultation requirements.
[9] Ai Group opposes the change. It says that the clause is not directed solely at the
employer’s ability to change ordinary hours of work although it permits this ‘by stating that
ordinary hours are to be worked at the discretion of the employer’.2 It says, the clause has
broader work to do and that the insertion of a reference to clause 40.2 where it does not
necessarily apply to the entire clause is both confusing and unnecessary.
[10] The interaction between the consultation provisions contained in clause 40.2 of the
Exposure Draft and clauses that relate to the setting of hours of work was considered in the
Consultation Clause Test Case3 where the Full Bench found:
[2017] FWCFB 3177
3
‘[46] We now turn to the relationship between the obligation to consult required by the
relevant term and other provisions within a modern award.
[47] A number of parties contended that the obligation to consult set out in the relevant
term should be read subject to other provisions of the modern award such that the other
provisions displaced the obligation to consult. An example serves to illustrate the proposition.
If a modern award contained a provision which allowed an employer to vary an employee’s
regular roster on the giving of a specified period of notice (say 7 days) then the obligation to
consult imposed by the relevant term would not apply.
[48] We are not persuaded that the relevant term was intended to operate in the manner
contended. As mentioned earlier, s.145A is not a source of power in that it does not confer a
right on an employer to change an employee’s regular roster or ordinary hours of work. The
source of such a power must be found elsewhere - either in the contract of employment or in
an industrial instrument, such as a modern award. It is significant that s.145A was enacted
against the background of existing provisions in modern awards which provide employers
with the right to change an employee’s regular roster or ordinary hours of work. It is also
significant that s.145A does not state that the obligation to consult is subject to any other
provisions in a modern award.
[49] If the proposition advanced were accepted it would, to a significant extent, effectively
render s.145A nugatory. The obligation to consult would have no operation in circumstances
where the modern award entitled an employer to change an employee’s regular roster or
ordinary hours of work. We are not persuaded that such a proposition is consistent with the
terms of s.145A or its legislative purpose.
[50] Section 145A is intended to impose a new, additional obligation to consult employees
in circumstances where their employer proposes to change their regular roster or ordinary
hours of work. There is no conflict between the imposition of such an obligation and existing
modern award provisions permitting the variation of a regular roster or ordinary hours of work
on the giving of a specified period of notice or pursuant to a facilitative provision. There is no
impediment to the employer complying with both provisions. The employer may still
implement the proposed change on the giving of the requisite notice, but will now be required
to consult the employees affected before implementing such a change. As we have mentioned
such consultation must provide the affected employees with a genuine opportunity to attempt
to persuade the employer to adopt a different course of action. For these reasons the relevant
term will make it clear that it is to be read in conjunction with other award provisions
concerning the scheduling of work and notice provisions.’
[11] We are satisfied that the inclusion of a reference to clause 40.2 (renumbered 41.2) in a
clause which otherwise suggests the employer retains the sole discretion to alter hours of
work will avoid confusion. However, we do not consider the change proposed by AMWU
achieves what it sets out to do.
[12] We have decided to amend clause 13.2(d) by adding an additional sentence to the end
of the clause that reads ‘Any change to rosters or hours of work is subject to the consultative
provisions in clause 41.2.’
13.3(b) Ordinary hours of work – continuous shiftwork
[13] For the same reasons given for clause 13.2(d), the AMWU propose that clause 13.3(b)
be amended to read:
[2017] FWCFB 3177
4
13.3(b) Subject to clause 13.3(d) , the ordinary hours of continuous shiftworkers are, at the
discretion of the employer, in accordance with Clause 40.2, to average 38 hours per week
inclusive of meal breaks and must not exceed 152 hours in 28 consecutive days.
[14] For the same reasons given in relation to clause 13.2(d) Ai Group oppose the change.
[15] For the same reasons as given above, we shall vary the clause by adding ‘Any change
to rosters or hours of work is subject to the consultative provisions in clause 41.2.’ to the end
of the clause.
Clause 13.5(a) – Methods of arranging ordinary working hours
[16] For the same reasons given above the AMWU seek to vary clause 13.5(a) so that it
reads:
13.5(a) Subject to the employer’s right in accordance with Clause 40.2 to fix the daily hours of
work for day workers from time to time within the spread of hours referred to in clause 13.2(d)
and the employer’s right in accordance with Clause 40.2 to fix the commencing and finishing
time of shifts from time to time, the arrangement of ordinary working hours must be by
agreement between the employer and the majority of employees in the enterprise or part of the
enterprise concerned. This does not preclude the employer reaching agreement with individual
employees about how their working hours are to be arranged.
[17] Ai Group oppose the change. They say that the wording proposed by AMWU is
cumbersome and appears to suggest that clause 40.2 is a source of power. For this reason it
says the insertion is misleading.
[18] We agree that the wording proposed is cumbersome and may lead to some confusion.
We think the additional sentence we have proposed for the clauses above will ensure there is
no confusion with respect to the requirement to consult. We will therefore add to the end of
clause 13.5(a) (renumbered 13.7(a)) the sentence:
‘Any change to rosters or hours of work is subject to the consultative provisions in
clause 41.2.’
Clause 29.2(a) – Rates for shiftworkers
[19] The AMWU seeks to alter the clause so that it reads:
Rostered shift means any shift of which the employee concerned, in accordance with
clause 40.2 has had at least 48 hours’ notice.
[20] Ai Group oppose the change because the clause does not relate to any change to an
employee’s roster or hours of work.
[21] We do not agree that any change is necessary to clause 29.2(a). It is a definitional
clause and does not go to how the hours of work are arranged or altered. No purpose is
achieved by the change sought by the AMWU. No change will be made to the clause.
[2017] FWCFB 3177
5
Clause 16.1(a) – Adult employee minimum wages
[22] Ai Group has raised concerns with respect to the proposed wording above the table at
clause 16.1(a).
[23] Ai Group, apart from raising some drafting issues, argues that the previous wording
created the obligation on an employer to pay minimum wages and that does not stop an
employer paying more than the minimum wages.
[24] We are not convinced that the wording of the clause should revert to earlier drafts. We
have however adopted some changes to the clause proposed by Ai Group. The words ‘per
week’ will be deleted as these are inconsistent with the wording in the table and the words ‘in
which the employee is working’ will be deleted so as not to create confusion with respect to
the provisions that relate to higher duties.
[25] The clause shall now read:
(a) An adult employee, other than one specified in clause 16.1(d), within a
level specified in the following table will be paid not less than the rate
assigned to the appropriate classification, as defined in Schedule B—
Classification Structure and Definitions:
Clause 16.1(b) – Adult employee minimum wages
[26] The October 2015 decision inserted a new clause 16.1(b) and indicated that ‘the
remaining paragraphs [be] re-numbered accordingly.’ The Exposure Draft has deleted the
previous clause 16.1(b). This was not the intention. It will be re-inserted as 16.1(c) and the
clause re-numbered accordingly.
Clause 30.1(e) – Definition of overtime
[27] The green text box will be deleted from clause 30.1(e) (renumbered 31.1(e). It is not
relevant to the clause.
Clause 30.11 – Rest period after overtime
[28] A green text box will be inserted after clause 30.11(b) (renumbered 31.13(b)) to
indicate that the exclusion of casual employees from the provision is being considered by the
Casual Employment Full Bench.
Clause 6.4(b) – Casual loading and Schedule H – Definitions – casual ordinary hourly rate
[29] The AMWU has proposed some substantial changes to both clause 6.4(b) and the
definition of casual ordinary hours in Schedule H. Ai Group says that no change should be
made to the clause or definition as expressed in the exposure draft.
[30] In reviewing the provisions of clause 6.4 it seems that it has not been drafted to reflect
the September 2015 decision4 with respect to the calculation of casual loading.
[2017] FWCFB 3177
6
[31] In the September 2015 decision the Full Bench said:
‘[84] However, in the case of modern awards containing any allowance
characterised as all purpose in nature, the exposure draft has provided that a casual
employee must be paid the ordinary hourly rate and in addition a loading of 25% of
the ordinary hourly rate. Because the ordinary hourly rate (as distinct from the
minimum hourly rate) includes any all purpose allowance, the consequence of this is
that the 25% loading is payable on any such all purpose allowance. This distinction
between the minimum hourly rate and the ordinary hourly rate was explained in the
July 2015 decision as follows (footnotes omitted):
“(ii) Definitions of all purpose and ordinary hourly rate of pay
[35] A definition of ‘all purpose’ has been inserted in all exposure drafts
containing such payments along the following lines:
‘all purposes means the payment will be included in the rate of pay of an
employee who is entitled to the allowance, when calculating any penalties or
loadings or payment while they are on leave.’
[36] The identification of a particular allowance or loading as being for all
purposes in the exposure drafts is intended to reflect the existing position in each of
the current modern awards. …
[47] We are not persuaded to depart from established practice in relation to the
operation of all purpose payments and how they interact with an employee’s rate of
pay. Definitions of ‘all purpose’ and ‘ordinary hourly rate of pay’ will be inserted into
all affected awards based on the wording in paragraphs [35] and [91]. Any issues as to
whether a particular payment is payable for all purposes, and, in particular, whether an
allowance should be added to a minimum rate before calculating a penalty or loading,
will be dealt with on an award-by-award basis. Ultimately the resolution of these
issues will turn on the construction of the relevant award and the context in which it
was made.”
[85] However in respect of the calculation of the casual loading vis-a-vis all
purpose allowances, the Commission went on to say in the July 2015 decision:
“[69] Some employer parties (e.g. Ai Group pp.12–13 re Cotton Ginning
Award 2010 and more generally, pp.17–18) have submitted that where the
current modern award states that the loading is calculated on “1/38th of the
weekly award wage” or “1/38th of the minimum weekly rate”, the casual
loading should not be calculated based on the ordinary hourly rate that is they
do not consider the all purpose allowance should be added to the minimum rate
before the 25% is calculated. They submit that the casual loading is 25% of the
minimum rate and added to the minimum hourly rate, then the all purpose
allowance is added after that.
[70] In our view it is desirable that there be a consistent rule relating to the
calculation of a casual loading which should apply across all awards. Our
provisional view is that the position of certain employer parties outlined above
at paragraph [69] is the preferred option that should be adopted across all
awards. That is, the casual loading will not be calculated based on the ordinary
[2017] FWCFB 3177
7
hourly rate. The casual loading will be calculated as 25% of the minimum rate,
with any all purpose allowance being added after that.”
[86] Parties were given an opportunity to make further written submissions in
relation to whether the casual loading should be applied to any all purpose allowances.
The submissions of union parties were consistently in opposition to the general rule as
proposed in the July decision. The submissions of employer parties generally
supported the establishment of a consistent principle, but differed in their degree of
support for the provisional decision identified in paragraph [70] of the July 2015
decision.’
[32] After considering the submissions of various parties the Full Bench reached three
conclusions. Firstly that:
‘[93] Having considered these submissions, we are satisfied that it is likely that the
adoption of the provisional decision would, in respect of a number of awards which
contain allowances which are currently expressly described as being all purpose in
nature or which are stated to form part of the ordinary hourly rate, result in reductions
in the hourly rates of pay for casual employees. Consistent with the submissions
advanced by ABI, we accept that those reductions, which may be in the order of one
half of one per cent of the current rate, would not be regarded as insignificant by those
employees on award minimum rates who would be directly affected by the proposed
approach. It is not necessary for current purposes to attempt to exhaustively identify
the number of awards affected, but it appears to be only a minority of awards.’
[33] Second, the Full Bench said:
‘[102] We accept the submission that the provisional decision is inconsistent with the
general approach adopted in the 2008 decision, namely that the casual loading should
be applied to the ordinary time rate. Although what constituted the ordinary time rate
was not the subject of express consideration in the 2008 decision, we consider it to be
well understood that an allowance which is described as all purpose in nature is one
that necessarily forms part of the ordinary time rate. That being the case, any departure
from that approach proposed by the provisional decision must be justified by cogent
reasons.’
[34] Third, the Full Bench said:
‘[110] The general approach will remain as expressed in the exposure drafts, namely
that the casual loading will be expressed as 25% of the ordinary hourly rate in the case
of awards which contain any all purpose allowances, and will be expressed as 25% of
the minimum hourly rate in awards which do not contain any such allowances.’
[35] It seems to us that the submissions of Ai Group5 on the wording of clause 6.4(b) in the
exposure draft issued following the October 2015 decision do no more than seek to re-agitate
matters raised by it and considered in the July 2015 decision and ultimately resolved in the
September 2015 decision.
[2017] FWCFB 3177
8
[36] The wording in the exposure draft for the Manufacturing Award published as a
consequence of the October 2015 decision does not reflect the September 2015 decision. This
must be addressed.
[37] The change of wording proposed by the AMWU may be an attempt to overcome the
identified drafting error. However, that change is, in our view, circular and does not clarify
the clause. Further, the proposed definition of casual ordinary hourly rate is confusing.
[38] We have decided to maintain the standard wording generally used in exposure drafts.
The following words will be inserted into clause 6.4(b):
(b) Casual loading
(i) For working ordinary time, a casual employee must be paid:
the ordinary hourly rate for the work being performed; plus
a loading of 25% of the ordinary hourly rate.
(ii) The casual loading constitutes part of the casual employee’s all purpose rate.
(iii) The resulting rate is the casual ordinary hourly rate.
[39] We see no reason to change the definition of casual ordinary hourly rate in Schedule H
of the exposure draft.
Schedule B – Summary of Wage Rates
[40] We have made a number of amendments to Schedule B – Summary of Wage Rates
(renumbered Schedule C) in line with suggestions from the parties. A revised Schedule C is at
Attachment B to this decision. Note that the cross references in that attachment are to the
exposure draft as amended by this decision and the rates have not been adjusted for the 2016–
17 Annual Wage Review.
Applicable hourly rate
[41] In the October 2015 decision we identified an anomaly in how some penalties were
paid given the definition of ordinary hourly rate. We identified the potential problems and
proposed a method of resolving the anomalies. We then said:
‘[106] The parties are asked to consider the proposed changes including if there are
clauses incorrectly identified as requiring the change or not identified that do require
the amendment. Any submissions should be made in accordance with the directions in
Part 4—Next Steps.’
[42] We identified 11 clauses in the Exposure Draft affected by this anomaly.
[43] Following extensive discussions the parties have put forward agreed variations to nine
(9) of the identified clauses to overcome the identified issues. The parties have reached
agreement on wording that negates the need to introduce any new term or definition into the
Exposure Draft.
[2017] FWCFB 3177
9
[44] We accept the proposed variations to wording of the clauses in the Exposure Draft as
underlined and set out below:
14.1(b) - Unpaid meal
breaks
(b) by agreement between an employer and an individual employee
or the majority of employees in an enterprise or part of an
enterprise concerned, an employee or employees may be required
to work in excess of five hours but not more than six hours without
a meal break. Employees will be paid for the sixth hour at the rate
applying immediately prior to the end of the fifth hour.
14.5(a) – Working
through meal breaks
(a) Subject to clause 14.1, an employee must work during meal
breaks at the rate of pay applying to the employee immediately
prior to the scheduled meal break whenever instructed to do so for
the purpose of making good any breakdown of plant or for routine
maintenance of plant which can only be done while the plant is
idle.
14.5(b) – Working
through meal breaks
(b) Except as otherwise provided in clause 14—Breaks and except
where any alternative arrangement is entered into by agreement
between the employer and the employee concerned, employees
must be paid as follows for all work done during meal hours and
thereafter until a meal break is taken:
(i) Except in the circumstances referred to in clauses 14.5(b)(ii),
(iii) and (iv): 150% of the ordinary hourly rate;
(ii) Where the unpaid meal break is during ordinary time on a
Saturday or a Sunday: 200% of the ordinary hourly rate;
(iii) Where the unpaid meal break is during ordinary time on a shift
on which the employee is entitled to a 15 per cent loading: 165%
of the ordinary hourly rate;
(iv) Where the unpaid meal break is during ordinary time on a shift
on which the employee is entitled to a 30% loading: 180% of the
ordinary hourly rate of pay.
15.4 – Ship trials The parties have agreed to retain the current Manufacturing Award
wording (clause 39.4).
23 – Extra rates not
cumulative
The extra rates in this award, except rates prescribed in clause
27.3—Special rates and rates for work on public holidays, are not
cumulative so as to exceed the maximum of double the ordinary
hourly rate.
[2017] FWCFB 3177
10
27.4(e) – Travelling
time
(i) The rate of pay for travelling time on Monday to Saturday is the
ordinary hourly rate of pay and on Sundays and public holidays is
150% of the ordinary hourly rate.
31.12(b) – Rest break
during overtime on
Saturday, Sunday or
public holiday
(b) Where a day worker is required to work overtime on a
Saturday, Sunday or public holiday or on a rostered day off, the
first rest break must be paid at the ordinary hourly rate.
31.12(c) – Rest break
before overtime after
ordinary hours
(c) Where overtime is to be worked immediately after the
completion of ordinary hours on a day or shift and the period of
overtime is to be more than one and a half hours, an employee,
before starting the overtime, is entitled to a rest break of 20
minutes to be paid at the rate of pay applying to the employee
immediately prior to the scheduled meal break.
31.15 – Standing by Subject to any custom prevailing at an enterprise, where an
employee is required regularly to hold themselves in readiness to
work after ordinary hours, the employee must be paid standing by
time at the employee’s ordinary hourly rate for the time they are
standing by.
Note that the cross references in this table are to the exposure draft as amended by this
decision.
[45] Clause 39.3 – Transfer to lower paid duties (renumbered clause 40.3) will be retained
in the form it was in prior to the October 2015 decision. We note that the parties have
reserved their positions on this clause and will raise those in the process of making
submissions with respect to the clause as part of the plain language re-drafting of standard
clauses in AM2016/15.
[46] The only provision that remains in dispute is clauses 34.5(a)(i) – Rostered day off
falling on a public holiday.
[47] The current provision in the Manufacturing Award, the exposure draft prior to the
October 2015 decision and the Exposure Draft are:
https://www.fwc.gov.au/awards-agreements/awards/modern-award-reviews/4-yearly-review/common-issues/am201615-plain-language
[2017] FWCFB 3177
11
Manufacturing Award Exposure draft prior to
October 2015 decision
Exposure Draft following
the October 2015 decision.
44.3 Rostered day off falling
on public holiday
(a) Except as provided for in
clauses 44.3(b) and (c) and
except where the rostered day
off falls on a Saturday or a
Sunday, where a full-time
employee’s ordinary hours of
work are structured to include a
day off and such day off falls on
a public holiday, the employee
is entitled, at the discretion of
the employer, to either:
(i) 7.6 hours of pay at the
ordinary time rate; or…
34.5 Rostered day off falling
on public holiday
(a) Except as provided for in
clauses 34.5(b) and (c) and
except where the rostered day
off falls on a Saturday or a
Sunday, where a full-time
employee’s ordinary hours of
work are structured to include a
day off and such day off falls on
a public holiday, the employee
is entitled, at the discretion of
the employer, to either:
(i) 7.6 hours of pay at the
ordinary time rate; or…
34.5 Rostered day off falling
on public holiday
(a) Except as provided for in
clauses 34.5(b) and (c) and
except where the rostered day
off falls on a Saturday or a
Sunday, where a full-time
employee’s ordinary hours of
work are structured to include a
day off and such day off falls on
a public holiday, the employee
is entitled, at the discretion of
the employer, to either:
(i) 7.6 hours of pay at the
applicable rate of pay; or…
[48] The Manufacturing Award provides for payment for a rostered day off falling on a
public holiday to be paid at the ‘ordinary time rate’. This was replicated in the exposure draft
prior to the October 2015 decision although ‘ordinary time rate’ was not defined. The general
anomaly identified in the October 2015 decision was proposed to be rectified by requiring
payment at the ‘applicable hourly rate’ which was defined as the ‘ordinary hourly rate plus
penalties and relevant loadings’ and this was reflected in the Exposure Draft following the
October 2015 decision.
[49] The disagreement between the parties as to what the appropriate wording of clause
34.5(a)(i) of the Exposure Draft should be goes to the question of what was intended in the
Manufacturing Award with respect to the rate to paid in circumstances where the employer, at
its discretion, determined to pay 7.6 hours of pay. Submissions from the parties have therefore
gone to matters of interpretation of the Manufacturing Award clause. The resolution of this
will determine the appropriate wording for the Exposure Draft.
[50] Both Ai Group and the AMWU properly outline the principles relevant to the
interpretation of an award or agreement. We do not repeat them here.
[51] Ai Group says that the appropriate wording for clause 34.5(a)(i) of the Exposure Draft
is:
(i) 7.6 hours of pay at the ordinary hourly rate; or…
[52] In their submission of 28 October 2016 Ai Group provide an extensive history of the
clause.
[53] An application by consent was made to the Australian Conciliation and Arbitration
Commission to vary the Metal Trades Award in 19746 to insert a clause in relation to seven
day shift workers that said:
[2017] FWCFB 3177
12
15(k) Seven Day Shift Workers
A seven day or continuous shift worker, that is a shift worker who is rostered to work
regularly on Sundays and holidays, when his rostered day off falls on a public holiday
prescribed by this clause shall at the discretion of the employer, be paid for that day at
the ordinary rate or have an additional day added to his annual leave. This sub-clause
shall not apply when the holiday on which he is rostered off falls on a Saturday or
Sunday. [Underlining added]
[54] This provision was replicated in the Metal Trades Award, 1971 reprinted on
22 January 19757 although the clause number was amended to clause 22(k) and its application
extended.
[55] In the same award the provisions in relation to afternoon and night shift allowances
stated that:
a shift worker whilst on afternoon or night shift shall be paid for such a shift 15 per
cent more than his ordinary rate.8
[56] Other penalty rates in clause 19(g) referred to the penalty being paid ‘in addition to’
the ordinary rate.
[57] Ai Group says that it is clear, when the clauses are considered together, that the
‘ordinary rate’ in clause 15(k) did not include shift penalties and that this conclusion is
supported by clauses in relation to penalties.
[58] In 1981, in response to the introduction of the 38 hour week, clause 22(k) of the Metal
Industry Award 19719 was deleted and replaced. It relevantly read:
22(k) Rostered Day Off Falling on Public Holiday
(i) An employee who works continuous work and who by the circumstances of the
arrangement of his ordinary hours of work is entitled to a rostered day off which falls
on a public holiday prescribed by this clause shall, at the discretion of the employer,
be paid for that day prior to 15 March 1982, seven hours 36 minutes at ordinary rates
or have an additional day added to his annual leave. This provision shall not apply
when the holiday on which he is rostered off falls on a Saturday or Sunday.
[59] The shiftwork provisions of the award at that time provided for payment for an
afternoon or night shift of ‘15 per cent more’ than the ordinary rate.
[60] Ai Group says that, during Award Simplification, wording of the clause was agreed
between Ai Group and the Metal Trades Federation of Union (MTFU).10 The relevant part of
the clause read:
7.5.4 Rostered Day Off Falling on Public Holiday
7.5.4(a) Except as provided for in 7.5.4(b), where a full-time employee’s ordinary
hours of work are structured to include a day off and such day off falls on a
public holiday, the employee is entitled to, at the discretion of the employer,
either:
[2017] FWCFB 3177
13
7 hours and 36 minutes pay at ordinary rates; or
7 hours 36 minutes added to his or her annual leave; or
a substitute day off on an alternative week day.
This shall not apply where the rostered day off falls on a Saturday or a
Sunday.
[61] Provisions in relation to payments for shiftworkers continued to be expressed in terms
of a percentage loading ‘in addition to his or her ordinary rate’.
[62] In the 2008–2009 Award Modernisation process the clause to be included in the
modern award was agreed between the parties.
[63] Given this historical context, in particular the clear intention that ‘ordinary rate’ did
not include shift and other penalties, Ai Group says that it is evident that the payment for an
RDO falling on a public holiday was always intended to be at the ordinary rate of pay, not
including any shift loadings or penalties.
[64] Of the AMWU submissions, Ai Group says that there was never intended to be any
equivalence of the three alternative methods of compensation available under the clause and
that, even on the AMWU’s proposal, there would still be no equivalence. Further, Ai Group
says that reliance of the AMWU on the Public Holiday Decision11 and the Public Holiday
Non Standard Workers Decision12 is mischievous as the outcomes of those decisions were
never reflected in the Metals Award or the Manufacturing Award.
[65] Ai Group says that its proposal is also consistent with the provisions of the NES (s.116
of the FW Act) that provide for payment at the base rate of pay for an employee who is absent
from work on a day or part day that is a public holiday and that base rate of pay is defined in
s.16 of the FW Act to exclude loadings and penalties (amongst other matters).
[66] The AMWU submits that clause 34.5(a)(i) should provide for:
(i) 7.6 hours pay at the employee’s rate for working ordinary hours including
applicable shift or weekend allowances.
[67] The AMWU, with whom the CEPU agrees, says that the clause does not apply in
circumstances where an employee has accrued additional time towards a rostered day off but
where an employee’s regular roster results in them being rostered off on a Monday to Friday.
It says that the clause is intended to ensure that such employees do not forfeit the benefit of
the public holiday.
[68] The clause gives the employer the option to decide which of the three alternatives
apply:
(i) 7.6 hours pay
(ii) 7.6 hours of extra annual leave
(iii) a substitute day off on an alternative weekday.
[69] The AMWU says that, if option (ii) is selected, the employee would be paid 17.5%
leave loading or shift loading for that day off.
[2017] FWCFB 3177
14
[70] If option (iii) is selected by the employer the employee would be entitled to the shift
loading otherwise payable.
[71] If the 7.6 hours pay is made at the ordinary hourly rate the AMWU says that it would
be at a rate not including the shift loading whilst the other two would be at a rate including the
loading.
[72] Relying on the decision in Kucks v CSR that the ‘meanings which avoid inconvenience
or injustice may reasonably be strained for’13 the AMWU submits that ‘ordinary time rate’
must be taken to include relevant shift penalties and loadings.
[73] The AMWU says that submissions of Ai Group must be rejected on the grounds that,
as has been evident in resolving the ‘applicable hourly rate’ issue, the meaning of the term
‘ordinary time rate’ varies on a clause by clause basis and the immediate context of the words
is the most relevant consideration. Further, the AMWU says that reliance on the NES is
misleading as the provisions of s.116 of the FW Act apply to standard workers and the
workers affected by this clause are non-standard workers.
[74] Further, the AMWU says that its interpretation should be favoured as it is consistent
with the decisions of the Commission in the Public Holiday cases.
[75] We have carefully considered the submissions of all parties in relation to this clause.
We accept that clause 34.5(a) only applies to non-standard workers (clause 34.5(b), (c) and
(d) apply to employees who have accrued additional time towards an RDO).
[76] Whilst the ‘equivalence’ argument advanced by the AMWU has some merit, the
history of the clause clearly indicates that the rate paid should not include any shift loadings.
When first proposed the clause was one that applied to shiftworkers. The relevant shiftwork
provisions indicated that that the ordinary rate for a shiftworker did not include the shift
penalty or loading of 15% (or higher). The ‘ordinary rate’ required to be paid for a rostered
day off that fell on a public holiday was clearly not intended to include payment of any shift
loadings or penalties the employee was otherwise entitled to receive.
[77] We do not consider it necessary to consider the application of the NES in such
circumstances or the application or otherwise of the public holiday test cases. If those
decisions were applicable the Metal Trades Award would have been appropriately varied and
their application within the context of that award considered.
[78] Clause 34.5(a) (renumbered clause 35.5(a)(i)) of the Exposure Draft will therefore be
amended to read:
35.5 Rostered day off falling on public holiday
(a) Except as provided for in clauses 35.5(b) and (c) and except where the rostered day
off falls on a Saturday or a Sunday, where a full-time employee’s ordinary hours of
work are structured to include a day off and such day off falls on a public holiday, the
employee is entitled, at the discretion of the employer, to either:
(i) 7.6 hours of pay at the ordinary hourly rate; or
[2017] FWCFB 3177
15
(ii) 7.6 hours of extra annual leave; or
(iii) a substitute day off on an alternative weekday
Agreed changes
[79] The changes listed in Attachment B are not disputed between the parties or are
drafting errors identified in the Exposure Draft. The changes will be adopted and reflected in
an amended Exposure Draft. Note that the clause numbering refers to the Exposure Draft
issued in conjunction with the October 2015 decision. Further changes will be made in the
consequent Exposure Draft to reflect any numbering issues arising from this decision not
otherwise addressed.
3. Professional Diving (Industrial) Award 2010
[80] In the October 2015 decision,14 we identified an issue in relation to the hours
provisions in the Professional Diving (Industrial) Award 2010 (the Industrial Diving Award).
The Industrial Diving Award contains terms and conditions for both “Offshore” and “Inshore”
divers.15 At clause 10 reference is made to the categories of employment and the hours of
work:
10 Types of employment
10.1 Employees under this award will be employed in one of the following categories:
(a) full-time employees; or
(b) casual employees.
10.2 Full-time employees
(a) Inshore divers must be employed by the week.
(b) For offshore divers, employment for the first four weeks will be on a weekly
basis and thereafter will be on a calendar month basis.
(c) A full-time employee is an employee who is engaged to work an average of 38
ordinary hours per week.
(d) Where employment is of less than four weeks’ duration, employees will be paid
casual rates.
10.3 Casual employees
(a) A casual employee is one engaged and paid as such.
(b) A casual employee will be paid an hourly rate with a minimum payment of
eight hours, except as provided for in clause 10.3(e).
(c) A casual employee will be paid per hour 1/38th of the relevant minimum wage
in clause 13—Classifications and minimum wages, plus a loading of 25%.
[2017] FWCFB 3177
16
(d) The casual loading is paid instead of annual leave, personal/carer’s leave, notice
of termination, redundancy benefits and the other entitlements of full-time or
part-time employment provided for in this award. The loading constitutes part
of the casual employee’s all purpose rate.
(e) Where casual employees are required to attend for work at the usual starting
time and are not required to start work, they must be paid four hours’ pay plus
fares and travelling time in accordance with clause 15.6.
(f) Casual employment is to be terminated by four hours’ notice on either side, or
by the payment or forfeiture of four hours’ wages as the case may be.
(Our underline)
[81] As is apparent, full-time employees are engaged to work an average of 38 ordinary
hours per week and casual employees are paid 1/38th of the relevant minimum wage plus a
loading of 25%. However clause 21—Hours of Work and Related Matters of the award
provides as follows:
21 Ordinary hours of work
21.1 Inshore divers
(a) The ordinary hours of work will not exceed 6 hours and 36 minutes per day which
may be worked between 6.00 am and 6.00 pm Monday to Friday.
(b) Work undertaken prior to the spread of hours provided by clause 21.1(a) for which
overtime rates are payable will be deemed for the purposes of this clause to be part of
the ordinary hours of work.
(c) The spread of hours provided by clause 21.1(a) may be altered by up to one hour by
mutual agreement between the employer and employees.
(d) Where employees are not employed on diving operations as such during the full 6
hours and 36 minutes in any one day, the employer will have the right to use their
services on other work for any time remaining.
21.2 Offshore divers
With the exception of employees engaged in operations rendering them subject to
greater than atmospheric pressure, the average daily hours of work will be no greater
than 12 hours. Starting and finishing times will be in accordance with a nominated
regularly recurrent roster schedule.
(Our underline)
[82] As can be seen from clause 21 the ordinary hours for inshore divers are not to exceed
6 hours and 36 minutes per day (33 hours per week) between the hours of 6.00 am and
6.00 pm Monday to Friday. Further, clause 24.1 of the award provides that inshore divers are
paid overtime for hours worked “in addition to their ordinary hours” which in clause 21.1 are
defined as 6 hours and 36 minutes on Monday to Friday. Offshore divers have no prescribed
ordinary hours of work but cannot work longer than 12 hours per day. Offshore divers
normally work an equal time roster of 12 hours a day, 7 days a week.
[2017] FWCFB 3177
17
[83] There is an obvious tension between a prescribed 38 hour week for full-time
employees and the terms of clauses 21.1(a) and 24.1 which effectively prescribe 33 ordinary
hours per week for inshore divers.
[84] In the October 2015 decision we said that while historically the ordinary hours for
inshore divers has been 33 hours per week, and the ordinary hours for offshore divers set at
38, no party could point to the reason for the distinction. 16 On that basis the parties were
provided with a further opportunity to provide submissions on whether the distinction should
be removed, with the NES standard of 38 hours per week being inserted into the Industrial
Diving Award.
[85] The Commission convened a conference on 4 January 2016 in Sydney with a video
link to Perth. Interested parties were asked to consider the terms of a number of previous
industrial instruments and those of a specific modern award:
a. The Professional Divers Association of Australasia v Aquarius Underwater Services
and others (Print C0901);
b. The Professional Divers (Interim) Award (Print C0945) at page 11;
c. The Professional Divers Award (Print C0964) at page 17; and
d. The Building and Construction General On-site Award 2010 at cl.19.3(a)(ii).
[86] Notice of the conference was provided to all named respondents to the pre-reform
award, the Professional Divers’ – Maritime Union of Australia Award 2002.17 Representatives
from The Maritime Union of Australia (MUA), The Australian Workers’ Union (AWU), the
Australian Mines and Metals Association (AMMA) and Fremantle Commercial Diving
attended the conference. After the conference a number of parties forwarded additional
correspondence to the Commission elaborating further on their arguments.
Submissions of parties
[87] The MUA and AWU (the Unions) submit that the Industrial Diving Award contains an
error by not accurately reflecting that inshore divers have historically worked a 33 hour week.
The reference to ordinary hours of 6 hours and 36 minutes per day is said to be correct but the
reference to a 38 hour week should only apply to offshore divers.
[88] The Unions submit that support for their position can be demonstrated by viewing the
history of the relevant provisions. The predecessor award, the Professional Divers’ –
Maritime Union of Australia Award 2002 referred to a 6 hour 36 minute ordinary working
day for inshore divers with casual employees receiving 1/33 of the weekly rate plus a 20%
loading. The reference to 1/33 of the weekly rate for inshore casual divers was not contained
in the Industrial Diving Award, which the MUA states was an error, although it did not attract
any attention until the current award review process commenced.
[89] In correspondence dated 4 February 2016, the MUA advised they were unable to shed
light on the genesis of the 33 hour week for inshore divers. They submit that employers
should be required to put a full merit argument on moving from a 33 hour week to a 38 hour
week similar to the case run in the matter arising from the 4 yearly review of the Stevedoring
https://www.fwc.gov.au/documents/documents/modern_awards/award/MA000020/default.htm
http://www.fwc.gov.au/documents/sites/awardsmodernfouryr/C0964-decision.pdf
http://www.fwc.gov.au/documents/sites/awardsmodernfouryr/C0945-decision.pdf
http://www.fwc.gov.au/documents/sites/awardsmodernfouryr/C0901-decision.pdf
http://www.fwc.gov.au/documents/sites/awardsmodernfouryr/C0901-decision.pdf
[2017] FWCFB 3177
18
Industry Award 201018 where employers unsuccessfully sought to move from a 35 hour week
to a 38 hour week.
[90] The Unions submit that the award’s history clearly shows that inshore divers have
always worked a 33 hour week and that this history is important in this context.
[91] AMMA submits there is no merit in maintaining a 33 hour week for inshore divers,
although they cannot identify the reason for the distinction in working hours between offshore
and inshore divers. They state that it is difficult to establish the precise reason for the creation
of the restriction of ordinary hours to 33 per week for inshore divers, which can be traced
back at least to the 1970s.
[92] In correspondence of 27 January 2016, AMMA attached a statement from a Mr Simon
Guthrie Director – The Diving Co NSW Pty Ltd. Mr Guthrie states that he has been a
commercial diver since 1972 and that he worked in the Bass Strait in the early 1980s. During
this time he became active in the union as a site delegate and as an organiser in NSW. The
union at that time was The Professional Divers Association of Australasia (PDAA) Mr
Guthrie states that carpenter/divers employed by the NSW Maritime Services Board at Goat
Island in Sydney Harbour worked a 6 hour 36 minute day. This came about because the
‘pump handlers’ whose job was to manually turn the air pumps for the divers, worked these
hours. From this historical connection 6.6 hours remained as the basis for the calculation of
the time that divers work per day.
[93] Interested parties were invited to comment on AMMA’s submissions (to which Mr
Guthrie’s statement was attached). The MUA replied, on 4 February 2016, noting AMMA’s
submissions and stating that ‘Our research has been unable to shed further light on the genesis
of the 33 hour week in the inshore diving area prior to the awards identified in the 23
November 2015 Notice of Listing’. The MUA did not object to Mr Guthrie’s statement
(attached to AMMA’s submissions), nor did it contest the proposition in the AMMA
submission that Mr Guthrie’s statement lent support to the proposition that the introduction of
the 33 hour week was ‘related to the arduous operation of pump equipment, which has long
been superseded by current equipment used by professional divers’.
[94] We note that pump handlers are no longer employed and inshore divers now rely on
air tanks to perform their tasks.19
[95] AMMA submitted that there is no requirement to have a merits argument before the
Commission as the Industrial Divers Award states that 38 hours per week are the hours of all
full-time divers and that the reference to the ordinary hours for inshore divers being 6 hours
and 36 minutes per day should read 7.6 hours per day.20 AMMA provided a detailed history
of the award and its predecessor federal instrument, the Professional Divers Award 1974.21
[96] Fremantle Commercial Diving (FCD) state that their contracts like others in the
industry are based on the Industrial Divers Award referring to a 38 hour week and that to
revert to a 33 hour week will be a cost impost of 13.15 per cent as the hourly rate will
increase. It also submits that no inshore diver works a 6 hour 36 minute day, with most days
being 10 hours or more due to the extensive safety precautions that need to be put in place
each day.
[2017] FWCFB 3177
19
[97] FCD submit that their current contracts are based on a casual employee being paid
1/38th of the minimum weekly rate in accordance with clause 10.3(c) of the award and that
any change to that calculation would see their costs increase by up to 13.15%.
[98] FCD contend that there is no justification for inshore divers having a 33 hour week.
The historical rationale for the 6 hours and 36 minute working day was the limitations of the
gas supply equipment but this is no longer relevant as such equipment is longer used in the
industry.22
[99] Further, the FCD noted that the MUA draft award provided to the Commission during
the award modernisation process provided for a 38 hour week not a 33 hour week.23
[100] Gray Diving Services Pty Ltd submit that a 33 hour week will have an adverse impact
on an employer’s ability to secure work and their ability to employ casuals.
[101] Indianic Group Pty Ltd submit that they are paying overtime for hours worked in
excess of 6 hours and 36 minutes which makes it ‘very hard to be competitive’ particularly in
a time when there is little work available.24
Conclusion
[102] All parties acknowledge the inconsistencies evident in the Industrial Diving Award.
The Unions submit that there is no basis for disturbing the 33 hour standard set in the pre
reform Professional Divers – Maritime Union of Australia Award 2002. The various
employer submissions contend, in essence, that there is no rational basis for a distinction to be
drawn between the ordinary hours of work of inshore and offshore divers and that the
ordinary hours for inshore divers should be set at 38 hours per week.
[103] The distinction between inshore and offshore divers’ hours appears to date back to the
early 1970s when inshore divers were first included in an award that had previously only
provided for offshore divers.25 In these early awards, the offshore divers were generally
referred to as ‘oil drilling divers’ while inshore divers were referred to as ‘other divers’. In a
1973 decision of Commissioner Portus26 it was suggested that non-oil drilling divers (inshore)
worked on a part-time basis on a daily rate; whereas offshore divers were employed full-time.
The Professional Divers Award 197427 made by the Commissioner provided that the ordinary
working hours for inshore divers shall not exceed 6 hours 36 minutes Monday to Friday.
[104] The contention advanced by the unions that an error has occurred in the drafting of the
Industrial Diving Award must be viewed against the fact that the MUA filed a draft of the
proposed Diving Industry Award during the award modernisation process which combined
professional (offshore/inshore) and recreational diving under one award. The hours clause
referred to in the proposed award provided for a 38 hour week. The proposed award made no
reference to inshore divers working 6 hours and 36 minutes per day nor that the casual inshore
diving hourly rate divisor should be 33.
[105] AMMA also filed a draft award for offshore/inshore and recreational diving during
the award modernisation process which stated that the working week for full-time employees
was 38 hours but, proposed that there be a casual hourly divisor of 33 for inshore divers and
also provided that the span of ordinary hours for inshore divers be 6 hours 36 minutes per day
[2017] FWCFB 3177
20
Monday to Friday. It is apparent that the Commission when making the Industrial Diving
Award was faced with a divergence of views on the proposed hours clause for divers.
[106] While no party could with any confidence state the origins of a 33 hour week for
casual inshore divers, occupational health and safety reasons were discounted as being a
factor.
[107] Whether the Full Bench when making the Industrial Diving Award made an error in
respect of the hours for inshore divers cannot be ascertained with any degree of certainty. In
publishing the 2010 exposure draft the Full Bench stated that it was largely reflective of the
Professional Divers’ – Maritime Union of Australia Award 2002 and the draft modern award
provided by the MUA without the reference to recreational diving.28 The Professional Diving
Industry (Industrial) Award 2010 exposure draft was published on 25 September 2009 and
parties were given an opportunity to make any further submissions. A number of parties chose
to make further submissions, but no party identified the inshore diving hours as an issue.
[108] As it stands, the Industrial Divers Award provides for a 38 hour week for all divers
with the ordinary hours for inshore divers not to exceed 6 hours 36 minutes per day Monday
to Friday. This is an incongruous outcome that needs to be rectified by providing either a 38
or 33 hour week for inshore divers for all purposes of the award.
[109] Contrary to the MUA’s submission of 31 December 2015, we are not persuaded that it
is necessary to require an evidentiary case similar to that undertaken in Stevedoring Industry
Award 201029.
[110] The circumstances in this case are clearly distinguishable from the Stevedoring
Industry Award 2010 decision. In that matter there was no evidence of inconsistency between
the provisions of the modern award such as is evident in the matter before us, further, as the
majority decision in that case makes clear:
‘… the evidence supports a finding that there are factors unique to this industry which are
relevant when considering the level of penalty rates in this Award’.30
[111] In the present case there is no evidentiary justification for maintaining a distinction in
ordinary hours of work as between inshore and offshore diving.
[112] It appears that the 33 hour week for ‘inshore diving’ was introduced some time ago –
by consent – and that it has not been the subject of an arbitral determination.
[113] It is understood that divers work across the two sectors, and accordingly it is difficult
to reconcile the distinction in hours for offshore divers and inshore divers. Further, we are not
persuaded of the merits of retaining the current prescription of a 33 hour week for inshore
divers. In our view the inconsistency between current award provisions should be resolved by
prescribing a 38 hour week for inshore divers, which may be worked between 6.00am and
6.00pm Monday to Friday.
[2017] FWCFB 3177
21
[114] Clause 21.1 of the Industrial Diving Award will be varied as follows:
21. Ordinary hours of work
21.1 Inshore divers
(a) The ordinary hours of work will not exceed 6 hours and 36 minutes per day 38 hours
per week which may be worked between 6.00 am and 6.00 pm Monday to Friday.
(b) Work undertaken prior to the spread of hours provided by clause 21.1(a) for which
overtime rates are payable will be deemed for the purposes of this clause to be part of
the ordinary hours of work.
(c) The spread of hours provided by clause 21.1(a) may be altered by up to one hour by
mutual agreement between the employer and employees.
(d) Where employees are not employed on diving operations as such during the full 6
hours and 36 minutes in any one day their ordinary hours, the employer will have the
right to use their services on other work for any time remaining.
4. Group 1A and 1B
[115] A decision in relation to the awards in Group 1A and 1B was issued on 23 December
201431 with additional decisions in relation to technical and drafting issues made on 13 July
201532 and 30 September 201533. Revised exposure drafts were published in September 2016
incorporating agreed changes, adjustments to wages and allowances arising from the 2015–16
Annual Wage Review (including schedules of hourly rates) and decisions arising from the
4 yearly review of general application. Common issues decisions in relation to part-day public
holidays and annual leave were also incorporated in exposure drafts for awards affected by
subsequent variations.
[116] A number of submissions were received commenting on the revised exposure drafts
and have been considered by the Commission. Where appropriate and consistent with
previous decisions made as part of the Review, exposure drafts have been further updated in
accordance with the agreed position of the parties. Since September 2016 further common
issues have been determined that affect this tranche of awards. Determinations issued in
recent months varying these awards in relation to award flexibility (time off instead of
payment for overtime) and payment of wages have now been incorporated in the exposure
drafts.
5. Group 1C, 1D and 1E
[117] A decision in relation to the awards in Group 1C, 1D and 1E was issued on 23 October
201534 and at paragraph [358] of that decision, the Full Bench directed parties to provide
feedback on the revised exposure drafts by 20 November 2015.
[118] A number of submissions were received and have been considered by the
Commission. Where appropriate and consistent with previous decisions made as part of the
Review, exposure drafts have been updated in accordance with the agreed position of the
parties. Throughout 2016 a number of common issues were determined that affect this tranche
of awards. In order to reduce the workload of parties and the Commission, exposure drafts for
[2017] FWCFB 3177
22
these awards have not been republished after each change. Determinations issued in recent
months varying these awards in relation to annual leave, award flexibility (time off instead of
payment for overtime) and payment of wages have now been incorporated in the exposure
drafts. Additionally wages and allowances (including schedules of hourly rates) have been
updated for the 2015–16 Annual Wage Review.
6. Next steps
6.1 Manufacturing Award
[119] The exposure draft based on the Manufacturing award will be republished shortly to
reflect the outcome of this decision. Any errors identified in the revised exposure draft should
be sent to amod@fwc.gov.au by 4.00 pm on Friday 30 June 2017.
[120] This decision resolves all outstanding technical and drafting issues in the
Manufacturing award other than the changes arising from the decision to incorporate the
manufacturing stream from the Vehicle Manufacturing Repair, Services and Retail Award
2010 into this award. (A substantive claim to insert an electrical licence allowance in this
award was determined in the decision issued on 3 March 201635.)
[121] If any party considers there are further outstanding technical and drafting issues in this
award details of the outstanding issues should be forwarded to amod@fwc.gov.au by 4.00 pm
on Friday 30 June 2017.
6.3 Industrial Diving Award
[122] A draft determination varying the Industrial Diving Award will be published shortly to
reflect the changes in [114]. Any comments on the draft determination should be sent to
amod@fwc.gov.au by 4.00 pm on Friday 30 June 2017.
6.2 Other Group 1 awards
[123] Revised exposure drafts for all awards in Group 1 (except the Manufacturing and
Vehicle awards), along with updated summaries of submissions on the exposure drafts will be
published for comment early next week.
[124] There appear to be a limited number of unresolved technical and drafting issues in this
group of awards.
[125] Parties are directed to review the revised exposure drafts and the summaries of
submissions and provide any comments in writing to amod@fwc.gov.au by 4.00 pm on
Friday 30 June 2017 outlining:
any errors in the exposure drafts or summaries; and
any outstanding issues in the summaries of submissions that they wish to press.
[126] Following receipt of any comments, further directions will be issued to deal with the
outstanding issues.
mailto:amod@fwc.gov.au
mailto:amod@fwc.gov.au
mailto:amod@fwc.gov.au
mailto:amod@fwc.gov.au
[2017] FWCFB 3177
23
[127] As the remaining issues are resolved during 2017 and following the adjustment to
wages and allowances arising from the 2016–17 Annual Wage Review, exposure drafts will
be amended and republished on the Commission’s website. In accordance with the Statement
issued on 27 March 2017 regarding the Plain language processes,36 these exposure drafts will
be further updated to incorporate the revised standard clauses.
[128] When all common and award-specific issues have been resolved, the awards will be
republished for final comment. Following that final consultation process the current award
will then be varied to substitute all clauses and schedules with the provisions in the exposure
draft.
PRESIDENT
Printed by authority of the Commonwealth Government Printer
Price code G, PR593652
[2017] FWCFB 3177
24
1 [2015] FWCFB 7236.
2 Ai Group submission 7 December 2015 paragraph 86.
3 [2013] FWCFB 10165.
4 [2015] FWCFB 6656.
5 Ai Group submission, 23 November 2015 at paras 34–70
6 (1974) 155 CAR 603.
7 (1975) 164 CAR 320.
8 Metal Trades Award 1971, clause 19(g)(i).
9 Print E9186
10 Print P9311
11 Print L4534
12 Print L9178
13 Kucks v CSR Limited
14 [2015] FWCFB 7236 at [207]–[227]
15 Offshore is diving from oil rigs, platforms vessels, Inshore is diving in coastal or inland waters e.g. jetties.
16 [2015] FWCFB 7236 at [226]
17 AP814932
18 [2015] FWCFB 1729
19 The Australian Standard for Occupational Diving (AS 2299.1:2015) specifies the type of equipment to be used as a
breathing gas supply
20 AMMA submission, 27 January 2016
21 Print D6539; (1978) 203 CAR 386 [P010]
22 FCD submission, 26 November 2015 at p.1
23 FCD submission, 3 February 2016 at p.1
24 Indianic Group submission, 9 December 2015. Note the submission incorrectly refers to overtime being payable after 6.2
hours. Clause 24.1 of the award provides that overtime is payable after 6 hours and 36 minutes.
25 In 1969 Commissioner Clarkson made the Oil Drilling Divers Award
26 The Professional Divers Association of Australasia v Aquarius Underwater Services and others Print C0901, 23 May 1973
27 Print C0964
28 [2009] AIRCFB 865 at [51]
29 [2015] FWCFB 1729
30 [2015] FWCFB 1729 at [149].
31 [2014] FWCFB 9412
32 [2015] FWCFB 4658
33 [2015] FWCFB 6656
34 [2015] FWCFB 7236
35 [2016] FWCFB 1294
36 [2017] FWCFB 1638
https://www.fwc.gov.au/decisionssigned/html/2017FWCFB1638.htm
https://www.fwc.gov.au/documents/decisionssigned/html/2016fwcfb1294.htm
https://www.fwc.gov.au/documents/decisionssigned/html/2015fwcfb7236.htm
https://www.fwc.gov.au/documents/decisionssigned/html/2015FWCFB6656.htm
https://www.fwc.gov.au/decisionssigned/html/2015FWCFB4658.htm
https://www.fwc.gov.au/decisionssigned/html/2014FWCFB9412.htm
https://www.fwc.gov.au/sites/awardsmodernfouryr/AM201484-sub-IG-091215.pdf
https://www.fwc.gov.au/documents/sites/awardsmodernfouryr/am201484-sub-fcd-030216.pdf
https://www.fwc.gov.au/documents/sites/awardsmodernfouryr/am201484-sub-fcd-261115.pdf
https://www.fwc.gov.au/sites/awardsmodernfouryr/AM201484-sub-amma-270116.pdf
https://www.fwc.gov.au/search/documents/results?query=1729&indexes%5b0%5d=2&start=0&page=0&keys=1729&sort=score&order=asc&filename=/documents/fullbench/2015FWCFB1729.htm
http://www.airc.gov.au/consolidated_awards/ap/ap814932/asframe.html
https://www.fwc.gov.au/documents/decisionssigned/html/2015fwcfb7236.htm
https://www.fwc.gov.au/documents/decisionssigned/html/2015fwcfb7236.htm
https://www.fwc.gov.au/sites/awardsmodernfouryr/AM201475andOrs-sub-AIG-231115.pdf
https://www.fwc.gov.au/documents/decisionssigned/html/2013fwcfb10165.htm
https://www.fwc.gov.au/sites/awardsmodernfouryr/2015fwcfb7236.pdf
25
Attachment A—List of Group 1A and 1B awards
Extract from Attachment A to Full Bench Decision of 17 March 2014 [2014] FWCFB 1788;
subgroups as per Attachment A of Decision on 23 October 2015 [2015] FWCFB 7236.
Group 1A & 1B (11 awards)
Award code Award title Subgroup
MA000060 Aluminium Industry Award 2010 1B
MA000098 Ambulance and Patient Transport Industry Award 2010 1A
MA000054 Asphalt Industry Award 2010 1B
MA000055 Cement and Lime Award 2010 1 1B
MA000022 Cleaning Services Award 2010 1A
MA000056 Concrete Products Award 2010 1B
MA000024 Cotton Ginning Award 2010 1A
MA000057 Premixed Concrete Award 2010 1B
MA000037 Quarrying Award 2010 1 1B
MA000107 Salt Industry Award 2010 1B
MA000016 Security Services Industry Award 2010 1A
1 The Full Bench proposes amalgamating these two awards – see [2014] FWCFB 9412 at
[172]
https://www.fwc.gov.au/decisionssigned/html/2014FWCFB9412.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000016/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000107/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000037/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000057/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000024/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000056/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000022/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000055/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000054/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000098/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000060/default.htm
https://www.fwc.gov.au/documents/decisionssigned/html/2015fwcfb7236.htm
https://www.fwc.gov.au/documents/decisionssigned/html/2014fwcfb1788.htm
[2017] FWCFB 3177
26
Group 1C, 1D & 1E (19 awards)
Award code Award title Subgroup
MA000001 Black Coal Mining Industry Award 2010 1D
MA000061 Gas Industry Award 2010 1E
MA000062 Hydrocarbons Industry (Upstream) Award 2010 1E
MA000010 Manufacturing and Associated Industries and Occupations Award 2010 1C
MA000093 Marine Tourism and Charter Vessels Award 2010 1E
MA000086 Maritime Offshore Oil and Gas Award 2010 1E
MA000059 Meat Industry Award 2010 1C
MA000011 Mining Industry Award 2010 1D
MA000072 Oil Refining and Manufacturing Award 2010 1D
MA000069 Pharmaceutical Industry Award 2010 1C
MA000074 Poultry Processing Award 2010 1C
MA000108 Professional Diving Industry (Industrial) Award 2010 1E
MA000109 Professional Diving Industry (Recreational) Award 2010 1E
MA000015 Rail Industry Award 2010 1D
MA000053 Stevedoring Industry Award 2010 1D
MA000017 Textile, Clothing, Footwear and Associated Industries Award 2010 1C
MA000071 Timber Industry Award 2010 1C
MA000089 Vehicle Manufacturing, Repair, Services and Retail Award 2010 1C
MA000044 Wool Storage, Sampling and Testing Award 2010 1C
http://www.fwc.gov.au/documents/modern_awards/award/ma000044/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000089/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000071/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000017/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000053/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000015/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000109/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000108/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000074/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000069/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000072/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000011/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000059/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000086/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000093/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000010/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000062/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000061/default.htm
http://www.fwc.gov.au/documents/modern_awards/award/ma000001/default.htm
[2017] FWCFB 3177
27
Attachment B—Agreed changes (see [79])
Clause Change
5.3(a) ‘14.1(a)’ will be replaced with ‘14.1(b)’
5.4(a) ‘13.3(b)’ will be replaced with ‘13.3(d)’
5.4(a) ‘13.4(a)’ will be replaced with ‘13.5(c)’
5.4(c) ‘13.3(b)’ will be replaced with ‘13.3(d)’
5.4(c) ‘13.4(a)’ will be replaced with ‘13.5(c)’
6.3(i)(ii) ‘clauses 0, 13.2(g) and 30.6’ will be replaced with ‘clauses 13.2(g), 29.1(b),
29.2(i)’, 31.7
7.11(c)(i) A full stop will be inserted between ‘training’ and ‘Provided’
9.2(i) A space will be inserted between ‘9.2(h)’ and ‘termination’
13.1(b) ‘or clause 5.4 as relevant’ added to the end of the clause
13.3(d) Replace the word ‘are’ with ‘is’ in the third line
14.1(a) The words ‘a break for’ will be deleted
14.5(b) The word ‘employees’ will be deleted and substituted with ‘an employee’
17.2 ‘0’ in the first line will be replaced with ‘17.6’
27.1(c)(iv) ‘Table A or B of’ will be deleted
27.3(m)(ii) The word ‘such’ will be inserted before ‘a boiler’ in the last line
29.2(i)(i) ‘on a rostered shift’ will be inserted into the first line after ‘ shiftworker’
29.2(i)(iv) ‘clauses 29.2(i)(ii) and (iii)’ will be deleted and replaced with ‘clauses 29.2(i)(i),
(ii) and (iii)’
29.2(i)(vi) A space will be inserted between ‘clause 29.2(i)’ and ‘are’
31.2(b) The clause applies to all shiftworkers, not just other than continuous
shiftworkers. It will be re-numbered as clause 30.3 and the remainder of the
clause re-numbered accordingly.
31.3(a) The first line of clause will be amended to read ‘If an employee is be required to
continue work on their rostered day off…’
35.2 ‘clauses 0, 13.2(g) and 30.6’ will be replaced with ‘clauses 13.2(g), 29.1(b),
29.2(i) and 31.7’.
39.2 The word ‘from’ will be inserted between ‘withhold’ and ‘any’.
The numbering in this table reflects the numbering in the exposure draft that has been
updated in accordance with this decision
[2017] FWCFB 3177
28
Schedule C—Summary of Wage Rates
NOTE: Employers who meet their obligations under this schedule are meeting their obligations under
the award.
C.1 Table of Rates
C.1.1 The following table provides a summary of overtime and penalty rates that apply under the
award. Penalty rates are payable for working shift work on a Saturday, on a Sunday, on Public
Holidays and on other occasions specified at C.1.2. The hourly rates of pay applicable then set
out in C.2 for full and part-time employees and in C.3 for casual employees.
Working hours % of ordinary
hourly rate/casual
ordinary hourly rate
Day Workers
Ordinary hours 100%
Ordinary hours on a Saturday (clauses 13.2(f)(i) and 29.1(a)(i)) 150%
Ordinary hours on a Sunday (clauses 13.2(f)(ii) and 29.1(a)(ii)) 200%
Ordinary hours on a public holiday (clauses 13.2(g) and 29.1(b)) 250%
Overtime on a public holiday (clause 31.7(a))
Overtime – first 3 hours per day Monday to Saturday (clause 31.2(a)(i)) 150%
Overtime –after 3 hours per day Monday to Saturday (clause 30.2(a)(ii)) 200%
Overtime on a Sunday (clause 31.6) 200%
Shiftworkers other than those engaged in vehicle manufacturing
Shiftworker – afternoon and night shift (clause 29.2(c)) 115%
Shiftworker – permanent night shift (clause 29.2(e)(iii)) 130%
Employed on continuous shift work – on a shift other than a rostered shift
(clause 29.2(f)(i))
200%
Employed on other than continuous shift work – Work on shift other than
rostered shift - first three hours (clause 29.2(f)(ii))
150%
Employed on other than continuous shift work – Work on shift other than
rostered shift - after three hours (clause 29.2(f)(ii))
200%
Shiftworker – ordinary hours on a Saturday (clause 29.2(h)(i)) 150%
Shiftworker – ordinary hours on a Sunday (clause 29.2(i)(ii) ) 200%
Continuous shiftworker – ordinary hours on a public holiday (clause
29.2(i)(i))
200%
Continuous shiftworker – overtime on a public holiday (clause 31.7(b)) 200%
Continuous shiftworker – overtime (clause 31.4) 200%
Afternoon or night shift – non-successive shifts – first 3 hours
(clause 29.2(d))
150%
Afternoon or night shift – non-successive shifts – after 3 hours
(clause 29.2(d))
200%
Other than continuous shiftworker – overtime - first 3 hours per shift
Monday to Saturday (clause 31.2(a))
150%
Other than continuous shiftworker – overtime - after 3 hours per shift
Monday to Saturday (clause 31.2(b))
200%
Other than continuous shiftworker – overtime - Sunday (clause 31.6) 200%
Other than continuous shiftworker – ordinary hours on public holiday (clause
29.2(i)(iii))
250%
Other than continuous shiftworker – overtime on public holiday (clause
30.7(c))
250%
[2017] FWCFB 3177
29
Working hours % of ordinary
hourly rate/casual
ordinary hourly rate
Shiftworkers engaged in vehicle manufacturing
Night shift only 130%
Alternating night and afternoon shifts 118%
Alternating day and night shifts—rate for the night shift 112.5%
Afternoon shift only 118%
Alternating day and afternoon shifts—rate for the afternoon shift 112.5%
Alternating day, afternoon and night shifts—rate for the afternoon and night
shift
112.5%
Continuous afternoon or night shift 112.5%
Saturday 125%
C.1.2 Other Circumstances Attracting a Penalty Payment
Circumstances % of minimum
ordinary hourly
rate/minimum casual
ordinary hourly rate
Working through meal break on a Saturday or Sunday (clause 14.5(b)(ii)) 200%
Working through meal break on a shift where employees are entitled to a
15% loading (clause 14.5(b)(iii))
165%
Working through meal break on a shift where employees are entitled to a
30% loading (clause 14.5(b)(iv))
180%
Working through meal break in all other circumstances (clause 14.5(b)(i)) 150%
Ship Trials (clause 15.4) 125% or 150%
Travelling time payment – Sunday or a public holiday (clause 27.4(e)(i)) 150%
Unrelieved shiftworker for work on RDO (clause 31.3) 200%
Rest period after overtime (clause 31.13(c))
200%
Call back other than continuous shiftworker (clause 31.14(a)(i)) 150% for first 3 hours
200% thereafter
Call back – continuous shiftworker (clause 31.14(a)(ii)) 200%
C.2 Full-time and part-time adult employee hourly rates
C.2.1 Where an allowance is payable for all purposes in accordance with clause 27.1, this
forms part of an employee’s ordinary hourly rate and must be added to the ordinary
hourly rate prior to calculating penalties, overtime and annual leave payments.
C.2.2 The minimum rates in the table below do not contain any all purpose allowances
prescribed in clause 27.1. Where an employee is entitled to an all purpose allowance
as prescribed in clause 27.1 an employee’s ordinary hourly rate is calculated
according to C.2.1.
[2017] FWCFB 3177
30
Classification Hourly rate
% of minimum hourly rate
100% 112.5% 115% 118% 125% 130% 150% 200% 250%
$ $ $ $ $ $ $ $ $
C14 / V1 17.70 19.91 20.36 20.89 22.13 23.01 26.55 35.40 44.25
C13 / V2 18.21 20.49 20.94 21.49 22.76 23.67 27.32 36.42 45.53
C12 / V3 18.91 21.27 21.75 22.31 23.64 24.58 28.37 37.82 47.28
C11 / V4 19.56 22.01 22.49 23.08 24.45 25.43 29.34 39.12 48.90
C10 / V5 20.61 23.19 23.70 24.32 25.76 26.79 30.92 41.22 51.53
C9 / V6 21.26 23.92 24.45 25.09 26.58 27.64 31.89 42.52 53.15
C8 / V7 21.90 24.64 25.19 25.84 27.38 28.47 32.85 43.80 54.75
C7 22.49 25.37 25.86 26.61 28.19 29.24 33.74 44.98 56.23
V8 22.55 26.58 25.93 27.88 29.54 29.32 33.83 45.10 56.38
C6 / V9 23.63 27.14 27.17 28.46 30.15 30.72 35.45 47.26 59.08
C5 / V10 24.11 27.86 27.73 29.22 30.95 31.34 36.17 48.22 60.28
C4 / V11 24.76 29.32 28.47 30.75 32.58 32.19 37.14 49.52 61.90
C3 / V12 26.06 30.05 29.97 31.52 33.39 33.88 39.09 52.12 65.15
C2(a) / V13 26.71 31.35 30.72 32.89 34.84 34.72 40.07 53.42 66.78
C2(b) / V14 27.87 19.91 32.05 20.89 22.13 36.23 41.81 55.74 69.68
Driver classifications
D1 19.36 22.30 22.26 23.39 24.78 25.17 29.04 38.72 48.40
D2 19.59 22.57 22.53 23.67 25.08 25.47 29.39 39.18 48.98
D3 19.83 22.84 22.80 23.95 25.38 25.78 29.75 39.66 49.58
D4 20.11 23.16 23.13 24.30 25.74 26.14 30.17 40.22 50.28
C.3 Casual adult employees
C.3.1 Casual ordinary hourly rate includes the casual loading which is payable for all
purposes. Where an allowance is payable for all purposes in accordance with clause
27.1, this forms part of an employee’s casual ordinary hourly rate and must be added
to the applicable minimum hourly rate in C.2. prior to the application of the 25% or
17.5% casual loading to form the casual ordinary hourly rate. The casual ordinary
hourly rate applies for all purposes and is used to calculate penalties and overtime.
C.3.2 The rates in the table below do not contain any all purpose allowances prescribed in
clause 27.1. Where a casual employee is entitled to an all purpose allowance
prescribed in clause 27.1 the employee’s casual ordinary hourly rate is calculated
according to C.3.1.
[2017] FWCFB 3177
31
(a) Casual rates—based on 25% casual loading in accordance with clause
6.4(b)(i)
Classification Hourly Rate
% of casual minimum hourly rate
(based on 25% casual loading in accordance with clause 6.4(b)(i))
100% 112.5% 115% 118% 125% 130% 150% 200% 250%
$ $ $ $ $ $ $ $ $
C14 / V1 22.13 24.90 25.45 26.11 27.01 28.77 33.20 44.26 55.33
C13 / V2 22.76 25.61 26.17 26.86 27.80 29.59 34.14 45.52 56.90
C12 / V3 23.64 26.60 27.19 27.90 28.86 30.73 35.46 47.28 59.10
C11 / V4 24.45 27.51 28.12 28.85 27.66 31.79 36.68 48.90 61.13
C10 / V5 25.76 28.98 29.62 30.40 28.45 33.49 38.64 51.52 64.40
C9 / V6 26.58 29.90 30.57 31.36 29.55 34.55 39.87 53.16 66.45
C8 / V7 27.38 30.80 31.49 32.31 30.56 35.59 41.07 54.76 68.45
C7 28.11 31.71 32.33 33.26 32.20 36.54 42.17 56.22 70.28
V8 28.19 33.23 32.41 34.86 33.23 36.65 42.29 56.38 70.48
C6 / V9 29.54 33.92 33.97 35.58 34.23 38.40 44.31 59.08 73.85
C5 / V10 30.14 34.82 34.66 36.52 35.24 39.18 45.21 60.28 75.35
C4 / V11 30.95 36.65 35.59 38.44 36.93 40.24 46.43 61.90 77.38
C3 / V12 32.58 37.56 37.47 39.40 37.69 42.35 48.87 65.16 81.45
C2(a) / V13 33.39 24.90 38.40 41.11 38.69 43.41 50.09 66.78 83.48
C2(b) / V14 34.84 25.61 40.07 26.11 40.73 45.29 52.26 69.68 87.10
Driver classifications
D1 24.78 27.88 27.83 29.24 29.24 32.21 61.95 49.56 61.95
D2 25.08 28.22 28.16 29.59 29.59 32.60 62.70 50.16 62.70
D3 25.38 28.55 28.51 29.95 29.95 32.99 63.45 50.76 63.45
D4 25.74 28.96 28.91 30.37 30.37 33.46 64.35 51.48 64.35
[2017] FWCFB 3177
32
(a) Casual rates—based on 17.5% casual loading in accordance with clause 6.4(b)(iv)
Classification Hourly Rate
% of casual minimum hourly rate
(based on 17.5% casual loading in accordance with clause 6.4(b)(iv))
100% 112.5% 115% 118% 125% 130% 150% 200% 250%
$ $ $ $ $ $ $ $ $
C14 / V1 20.80 23.40 23.92 24.54 26.00 27.04 31.20 41.60 51.99
C13 / V2 21.40 24.07 24.61 25.25 26.75 27.82 32.10 42.79 53.49
C12 / V3 22.22 25.00 25.55 26.22 27.78 28.89 33.33 44.44 55.55
C11 / V4 22.98 25.86 26.43 27.12 28.73 29.88 34.47 45.97 57.46
C10 / V5 24.22 27.24 27.85 28.58 30.28 31.48 36.33 48.43 60.54
C9 / V6 24.98 28.10 28.73 29.48 31.23 32.47 37.47 49.96 62.45
C8 / V7 25.73 28.95 29.59 30.36 32.16 33.45 38.60 51.47 64.33
V8 26.50 29.81 30.48 32.76 33.13 34.45 39.74 52.99 66.24
C6 / V9 27.77 31.24 31.94 33.44 34.71 36.09 41.65 55.53 69.41
C5 / V10 28.34 31.88 32.59 34.33 35.43 36.84 42.51 56.68 70.85
C4 / V11 29.09 32.73 33.45 36.13 36.36 37.82 43.64 58.19 72.73
C3 / V12 30.62 34.45 35.21 37.03 38.28 39.81 45.93 61.24 76.55
C2(a) / V13 31.38 35.31 36.09 38.64 39.23 40.80 47.08 62.77 78.46
C2(b) / V14 32.75 36.84 37.66 24.54 40.94 42.57 49.12 65.49 81.87